> ## Content Index
> Fetch the complete content index at: https://www.whsbrief.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Fifteen Codes Rewritten in Two Weeks: Do Your SWMS Still Speak the Old Language?
- URL: https://www.whsbrief.com/fifteen-codes-rewritten-in-two-weeks-do-your-swms-still-speak-the-old-language/
- Published: 2026-11-17T22:30:00.000Z
- Updated: 2026-11-17T22:29:59.000Z
- Description: Safe Work Australia has updated 15 model codes ahead of the 1 December switch to exposure limits, so procedures and training that quote the old versions are about to date.
- Author: WHS Brief
- Tags: blog

On 12 November Safe Work Australia published updated versions of 15 model Codes of Practice. The list is long. It covers abrasive blasting, confined spaces, demolition, excavation, both asbestos codes, how to manage WHS risks, hazardous chemicals, labelling, safety data sheets, noise, respirable crystalline silica, spray painting and powder coating plus welding. The healthcare and social assistance code is on the list too. The updates adopt the new workplace exposure limit terminology and link to new air monitoring guidance. They land two weeks before 1 December, when the workplace exposure limits replace the exposure standards.

### The Law Changes Once. Your Documents Change Many Times.

Most of the attention on 1 December has focused on the numbers. Which substances have lower limits, which have deferred dates, which monitoring programs need to change. That work matters. But this week's update points to a quieter problem. Every procedure, SWMS, training slide and induction that quotes the old codes or the old exposure standard list is about to be out of date.

From 1 December no person may be exposed to an airborne contaminant above the limit in the WEL list. Until then the current WES list still applies. A document that says "exposure standard" will not suddenly make a site unsafe. It will tell a worker, an auditor or an inspector that your system has not kept up.

Ask yourself:

- How many of your documents name a code of practice by title or year?
- Which of those codes are on the list of 15?
- Do any SWMS or risk assessments quote a specific exposure standard figure?
- Who owns the update? Do they know the deadline is 1 December?

### Model Codes Are Not Yet Your Codes

There is a nuance worth understanding. Model codes only take legal effect once each jurisdiction adopts them. A model code published by Safe Work Australia is a template. Your state or territory regulator decides when and whether it becomes an approved code in your jurisdiction.

That does not make the update optional reading. In NSW all codes have been legally enforceable under section 26A since 1 July 2026, so duty holders must comply with an applicable code or achieve an equivalent or higher standard. Elsewhere an approved code can be used as evidence of what is known about a hazard. Either way, the version your documents rely on matters.

- Check your regulator's website for the version of each code that applies in your jurisdiction.
- Record which version your procedures rely on, with a date.
- Set a reminder to check again when your regulator announces adoption of the updated model codes.

### A Message for Trainers

The brief made a point of naming RTOs alongside PCBUs. There is good reason for that. Training materials have a long shelf life. A slide deck built in 2024 may be delivered dozens of times before anyone opens the source file again. Learners who are taught "exposure standards" in December will walk onto sites that are working to exposure limits.

If you deliver confined spaces, silica, asbestos awareness, welding or hazardous chemicals training, a short review now will save awkward questions in the new year. Look for the old terminology and outdated code references. Check air monitoring content against the new guidance.

### Start With the Ones You Use Most

Fifteen codes is a lot to review in two weeks. Do not try to read them all cover to cover. Start with the two or three that drive most of your high risk work. Search your document library for their titles. Fix the references first, then work through the content changes.

If an inspector picked up the SWMS for your next hot work or confined space job on 2 December, would it speak the same language as the law that started the day before?